fix(queue): draw the scrim only where it can be tapped

Below 600px `.panel-content` is `width: 100%`, so the scrim sat
entirely underneath an opaque panel -- measured at 424x439, host,
panel and scrim all 424x318. It dimmed nothing and dismissed nothing
there while wearing `cursor: pointer`, so #24's tap-outside-to-close
did not exist on the device it was drawn for.

Of the issue's two directions this takes the second. A gutter is the
drawer pattern and buys the affordance by taking width off a
full-screen surface on a 424px viewport; #55 already made the queue a
*screen* at that width, whose ways out are back and a 44px close
button. So there is no scrim there rather than an unreachable one.

Existence is `matchMedia` rather than `display: none`, on `job-band`'s
rule: a hidden scrim is still an element carrying the handler. The
600-899 band, where the panel is a 320px column of a wider content
area and the scrim has real uncovered pixels, is untouched.

The e2e half asserts *absence* at 424x439 rather than clicking,
because a phone-width case that clicks the scrim's centre hits the
panel and passes on the broken build -- which the issue anticipates.

Closes #171

CLAUDE.md

@@ -2069,9 +2069,26 @@ one that closes the queue — the reported defect moved one press later,
 which looks exactly like a press that did nothing.
 
 **And the way out is 44px on a phone.** With the panel spanning the
-whole width the scrim has no uncovered pixels at all, so the close
-button is the only pointer route out of a full-screen surface; it was
-**25×21px**.
+whole width there is no scrim there at all, so the close button is the
+only pointer route out of a full-screen surface; it was **25×21px**.
+
+**The scrim is drawn only where it can be tapped** (#171). Below 600px
+`.panel-content` is `width: 100%`, so the scrim sat entirely underneath
+an opaque panel — measured at 424×439, host, panel and scrim all
+424×318 — dimming nothing and dismissing nothing while wearing
+`cursor: pointer`. #24's tap-outside-to-close cannot exist on a surface
+with no outside, and the screen above is what answers it instead: back,
+and a 44px close button. The alternative — a gutter, which is the
+drawer pattern — was declined, because it buys the affordance by taking
+width off a full-screen surface on a 424px viewport. Two things about
+it are load-bearing. Its **existence** is `matchMedia`, not
+`display: none`, on `job-band`'s rule: a hidden scrim is still an
+element carrying the dismissal handler. And **the 600–899 band is
+untouched**, where the panel is a 320px column of a wider content area
+and the scrim has real uncovered pixels — which is why the e2e half
+asserts *absence* at 424×439 rather than clicking, since a phone-width
+case that clicks the scrim's centre hits the panel and passes on the
+broken build.
 
 What this does **not** fix is `page-header` overflowing on its own:
 at 900×600 "New Smart Playlist" is still clipped to 114 of 162px with

e2e/specs/queue-as-a-screen.spec.ts

@@ -179,8 +179,8 @@ test.describe('the queue is a screen where it covers the content', () => {
    */
 
   /**
-   * With the panel spanning the whole width the scrim has no uncovered
-   * pixels, so the close button is the only pointer route out of a
+   * With the panel spanning the whole width there is no scrim here at
+   * all (#171), so the close button is the only pointer route out of a
    * full-screen surface. Measured at 424×439 before #55: **25×21px**.
    */
   test('offers a way out a thumb can hit', async ({ app }) => {
@@ -194,6 +194,33 @@ test.describe('the queue is a screen where it covers the content', () => {
     expect(box!.width).toBeGreaterThanOrEqual(44);
     expect(box!.height).toBeGreaterThanOrEqual(44);
   });
+
+  /**
+   * #171 — and it draws no scrim, because there is nowhere to tap.
+   *
+   * `.panel-content` is `width: 100%` here, so the scrim sat entirely
+   * underneath it: measured at 424×439, host, panel and scrim all
+   * 424×318. #24's tap-outside-to-close cannot exist on a surface with
+   * no outside, and a `cursor: pointer` layer nobody can reach is a
+   * claim the component cannot keep.
+   *
+   * Asserted as absence rather than by clicking, for the reason the
+   * issue gives: a naive phone case clicks the scrim's centre and hits
+   * the panel, so it passes on the build this exists to fail. The scrim
+   * is still real between 600 and 899px, which `queue-overlay.spec.ts`
+   * asserts at 900×600 by clicking it.
+   */
+  test('draws no scrim, because a screen has no outside to tap', async ({
+    app,
+  }) => {
+    await openTheQueue(app);
+
+    const scrim = await queue(app).evaluate(
+      (el) => el.shadowRoot!.querySelector('.scrim') !== null,
+    );
+
+    expect(scrim).toBe(false);
+  });
 });
 
 /**

frontend/src/components/queue-panel/queue-panel.ts

@@ -13,6 +13,7 @@ import type { MenuSurface } from '../menu-surface/menu-surface';
 import '../menu-surface/menu-surface';
 import '@awesome.me/webawesome/dist/components/dropdown-item/dropdown-item.js';
 import { QueueController } from '@store/controllers/queue-controller';
+import { PHONE_QUERY } from '@utils/breakpoints';
 import { creditStore } from '@store/credit-store';
 import {
     describeQueueSource,
@@ -120,6 +121,25 @@ export class QueuePanel
     @property({ type: Boolean, reflect: true })
     overlay = false;
 
+    /**
+     * Phone width, from `matchMedia` rather than from a media query,
+     * because it decides whether the scrim *exists* (#171) —
+     * `job-band`'s rule, and a stylesheet cannot express it: a
+     * `display: none` scrim is still an element with a click handler.
+     *
+     * Below 600px the panel spans the whole content area, so the scrim
+     * has no uncovered pixels: measured at 424x439, host, panel and
+     * scrim are all 424x318 with the scrim entirely underneath. It dims
+     * nothing and dismisses nothing there, and the queue is a *screen*
+     * at that width anyway (#55) — back and a 44px close button are its
+     * ways out. Between 600 and 899 the panel is a 320px column of a
+     * wider content area, the scrim is reachable, and #24's
+     * tap-outside-to-close is real; that band is untouched.
+     */
+    @state() private phone = false;
+
+    private phoneQuery?: MediaQueryList;
+
     @state()
     private isDragging = false;
 
@@ -391,6 +411,8 @@ export class QueuePanel
             display: none;
         }
 
+        /* Overlay only, and above 600px only -- see the phone field,
+           which is where that half is decided (#171). */
         .scrim {
             position: absolute;
             inset: 0;
@@ -414,10 +436,10 @@ export class QueuePanel
 
             /* A screen's way out has to be hittable with a thumb.
                Measured at 424x439 before #55: these were **25x21px**,
-               and with the panel spanning the whole width the scrim
-               underneath has no uncovered pixels at all -- so it was
-               the only pointer route out of a full-screen surface.
-               Back answers it now as well, which is the other half.
+               and with the panel spanning the whole width there is no
+               scrim here at all (#171) -- so this is the only pointer
+               route out of a full-screen surface. Back answers it now
+               as well, which is the other half.
 
                Sized only in overlay mode: inline these sit in a 320px
                column beside the content, where a mouse is what reaches
@@ -847,6 +869,12 @@ export class QueuePanel
         // desktop width rather than the minimum.
         this.updateOverlayMode();
 
+        // Read here rather than in a field initialiser, so a test can
+        // install its own matchMedia before the element is created.
+        this.phoneQuery = window.matchMedia?.(PHONE_QUERY);
+        this.phone = this.phoneQuery?.matches ?? false;
+        this.phoneQuery?.addEventListener('change', this.onPhoneMedia);
+
         if (this.parentElement) {
             this.spaceObserver = new ResizeObserver(() =>
                 this.updateOverlayMode(),
@@ -889,6 +917,8 @@ export class QueuePanel
         this.creditsUnsub = undefined;
         this.spaceObserver?.disconnect();
         this.spaceObserver = undefined;
+        this.phoneQuery?.removeEventListener('change', this.onPhoneMedia);
+        this.phoneQuery = undefined;
         document.removeEventListener('keydown', this.onOverlayKeydown);
         document.removeEventListener(
             'mousemove',
@@ -955,6 +985,10 @@ export class QueuePanel
         this.overlay = available - this.panelWidth < MAIN_PANEL_FLOOR;
     };
 
+    private onPhoneMedia = (e: MediaQueryListEvent): void => {
+        this.phone = e.matches;
+    };
+
     /**
      * Escape closes a scrimmed overlay, which is the one keyboard rule
      * every dialog in this app already follows.
@@ -1991,7 +2025,7 @@ export class QueuePanel
         const tracks = this.queue.tracks;
 
         return html`
-            ${this.overlay
+            ${this.overlay && !this.phone
                 ? html`<div
                       class="scrim"
                       part="scrim"

frontend/test/components/queue-overlay-mode.test.ts

@@ -29,8 +29,38 @@ import { shadow } from '@test/support/render';
 
 const wrappers: HTMLElement[] = [];
 
+let restoreMedia: (() => void) | null = null;
+
+/**
+ * Answer the shell's phone query with `phone` until restored.
+ *
+ * Stubbed rather than emulated, for the reason `search-dialog.test.ts`
+ * gives: the runner's viewport is fixed at 1280x800, and the panel
+ * reads `matchMedia` in `connectedCallback` precisely so a test can
+ * answer it first.
+ */
+function stubPhone(phone: boolean): void {
+  const real = window.matchMedia.bind(window);
+
+  window.matchMedia = ((q: string) =>
+    q.includes('max-width: 599px')
+      ? {
+          matches: phone,
+          media: q,
+          addEventListener() {},
+          removeEventListener() {},
+        }
+      : real(q)) as typeof window.matchMedia;
+
+  restoreMedia = () => {
+    window.matchMedia = real;
+  };
+}
+
 afterEach(() => {
   for (const w of wrappers.splice(0)) w.remove();
+  restoreMedia?.();
+  restoreMedia = null;
 });
 
 /**
@@ -157,6 +187,52 @@ describe('the queue panel decides whether it can be a column', () => {
     }
   });
 
+  /**
+   * #171 — the scrim is a dismissal target, so it exists only where it
+   * has pixels to be tapped.
+   *
+   * Below 600px `.panel-content` is `width: 100%`, so the scrim is
+   * entirely underneath an opaque panel: measured at 424x439, host,
+   * panel and scrim all 424x318. Drawing it there is a `cursor:
+   * pointer` click target nobody can reach, and the queue is a screen
+   * at that width anyway (#55) — back and the close button are its ways
+   * out. Existence rather than `display: none`, because a hidden scrim
+   * is still an element carrying the handler.
+   */
+  it('draws no scrim at phone width, where it would have no reachable pixels', async () => {
+    stubPhone(true);
+
+    const el = await panelIn(424);
+
+    expect(el.overlay).toBe(true);
+    expect(el.shadowRoot?.querySelector('.scrim')).toBeNull();
+
+    // The way out a thumb can hit is still there.
+    expect(
+      shadow(el, '[data-testid="queue-close"]')?.getAttribute('aria-label'),
+    ).toBe('Close queue');
+  });
+
+  /**
+   * The 600–899 band is where the panel is a 320px column of a wider
+   * content area, so the scrim has uncovered pixels and #24's
+   * tap-outside-to-close is real. Same width as the overlay tests
+   * above, with the phone query explicitly answered `false`, so this
+   * fails if the scrim is ever dropped for every overlay.
+   */
+  it('keeps the scrim above phone width, where it can be tapped', async () => {
+    stubPhone(false);
+
+    const el = await panelIn(700);
+
+    expect(el.overlay).toBe(true);
+
+    shadow<HTMLElement>(el, '.scrim')?.click();
+    await el.updateComplete;
+
+    expect(el.open).toBe(false);
+  });
+
   /**
    * Escape belongs to the overlay, not to the queue. An inline panel is
    * beside the content rather than over it, so there is nothing to