fix(android): install and launch the package the APK declares

The four adb-driven tasks in build/android/Taskfile.yml began with
`adb uninstall {{.APP_ID}}`, where APP_ID defaulted to
"app.yellowjacket" -- the release id. `run` and `run:device` build the
*debug* variant, whose applicationIdSuffix makes it
"app.yellowjacket.dev", so both uninstalled the user's released app,
took the library with it, installed a different package, and then
failed to launch the one they had just removed.

The id is read back from the built APK now (scripts/android-pkgid.sh,
`aapt2 dump packagename`) rather than written down a second time, so
the thing installed and the thing launched agree by construction --
whatever Gradle resolved the applicationId to, suffixes included, is in
the file. An APK it cannot read is a hard failure and never a fallback
to a default; guessing is the bug. APP_ID survives with no default as
an *assertion*: it is checked against the artifact and refused, naming
both, before anything is installed or a target is even chosen.

The uninstall is gone rather than corrected. It was there to make the
bare `install` on the next line work at all -- Android refuses an
install over an existing package without -r -- so `install -r` removes
the reason for it. What is left is the one case an uninstall is really
the remedy, a changed signing certificate, and that is exactly the case
where doing it silently costs the user their library. So it is reported
with the command to run, which is the answer scripts/android-emulator.sh
had already reached for `make android-install`.

And the emulator tasks now say "emulator" to adb. A bare `adb install`
with one device attached picks that device whatever it is, so with a
phone plugged in and no emulator running, the task whose summary reads
"in the Android Emulator" installed on the phone -- the same data loss,
from the task whose name gives no warning. Several matching targets is
an error naming them rather than a silent pick of the first.

Closes #159

build/android/Taskfile.yml

@@ -4,18 +4,28 @@ includes:
   common: ../Taskfile.yml
 
 vars:
-  # The *installed* package name, which every adb-driven task below uses
-  # to uninstall, launch and filter. It must agree with `applicationId`
-  # in app/build.gradle, and nothing enforces that.
+  # APP_ID is an *assertion*, not a setting, and it has no default.
   #
-  # ANDROID.md says to set this in build/config.yml. That does not work
-  # in beta.8, checked both ways: `wails3 task` builds its var set from
-  # CLI KEY=VALUE arguments and the Taskfile tree only -- nothing reads
-  # config.yml -- and even when set it feeds only these adb commands,
-  # never Gradle. So the identity is declared twice, here and in
-  # build.gradle, and a change to one alone means the official run and
-  # deploy tasks address a package that is not installed.
-  APP_ID: '{{.APP_ID | default "app.yellowjacket"}}'
+  # It used to be the id every adb-driven task below uninstalled,
+  # launched and filtered, defaulting to "app.yellowjacket". It could
+  # never have been a setting: `wails3 task` builds its var set from CLI
+  # KEY=VALUE arguments and the Taskfile tree only -- nothing reads
+  # build/config.yml, contrary to ANDROID.md, checked with --dry -- and
+  # even when set it fed only the adb commands, never Gradle. So the
+  # identity was declared twice, here and as `applicationId` in
+  # app/build.gradle, with nothing enforcing that they agree.
+  #
+  # They did not agree. The debug buildType carries
+  # `applicationIdSuffix ".dev"`, so the tasks that assemble a debug APK
+  # addressed the *release* id -- on a device, the user's installed app
+  # and their library (#159).
+  #
+  # The id is now read back from the built APK by scripts/android-
+  # pkgid.sh, so the thing installed and the thing launched agree by
+  # construction. Passing APP_ID= says "this build had better declare
+  # that id", and the deploy refuses before touching anything if it does
+  # not -- which is the check that would have caught #159 statically.
+  APP_ID: '{{.APP_ID | default ""}}'
   MIN_SDK: '21'
   TARGET_SDK: '35'
   # The emulator runs the host architecture; physical devices are arm64
@@ -372,9 +382,7 @@ tasks:
           ARCH: '{{.ARCH | default .HOST_ARCH}}'
     cmds:
       - task: ensure-emulator
-      - '"{{.ADB}}" uninstall {{.APP_ID}} 2>/dev/null || true'
-      - '"{{.ADB}}" install "{{.BIN_DIR}}/{{.APP_NAME}}.apk"'
-      - '"{{.ADB}}" shell am start -n {{.APP_ID}}/com.wails.app.MainActivity'
+      - './scripts/android-deploy.sh --apk "{{.BIN_DIR}}/{{.APP_NAME}}.apk" --target emulator{{if .APP_ID}} --expect "{{.APP_ID}}"{{end}}'
 
   run:
     summary: Build, install and launch a debug build in the Android Emulator
@@ -383,9 +391,7 @@ tasks:
       - task: build
     cmds:
       - task: assemble:apk
-      - '"{{.ADB}}" uninstall {{.APP_ID}} 2>/dev/null || true'
-      - '"{{.ADB}}" install "{{.BIN_DIR}}/{{.APP_NAME}}.apk"'
-      - '"{{.ADB}}" shell am start -n {{.APP_ID}}/com.wails.app.MainActivity'
+      - './scripts/android-deploy.sh --apk "{{.BIN_DIR}}/{{.APP_NAME}}.apk" --target emulator{{if .APP_ID}} --expect "{{.APP_ID}}"{{end}}'
 
   device:list:
     summary: Lists connected Android devices and emulators (serials)
@@ -400,25 +406,7 @@ tasks:
           ARCH: arm64
     cmds:
       - task: assemble:apk
-      - |
-        DEVICE='{{.DEVICE_ID | default ""}}'
-        if [ -z "$DEVICE" ]; then
-          DEVICE="${DEVICE_ID:-}"
-        fi
-        if [ -z "$DEVICE" ]; then
-          DEVICE=$("{{.ADB}}" devices | awk 'NR > 1 && $2 == "device" && $1 !~ /^emulator-/ { print $1; exit }')
-        fi
-        if [ -z "$DEVICE" ]; then
-          echo "Error: no connected physical Android device found."
-          echo "Pass DEVICE_ID=<serial> to target a device explicitly."
-          echo "Find connected device serials with: {{.ADB}} devices"
-          exit 1
-        fi
-
-        echo "Deploying {{.BIN_DIR}}/{{.APP_NAME}}.apk to device $DEVICE..."
-        "{{.ADB}}" -s "$DEVICE" uninstall {{.APP_ID}} 2>/dev/null || true
-        "{{.ADB}}" -s "$DEVICE" install "{{.BIN_DIR}}/{{.APP_NAME}}.apk"
-        "{{.ADB}}" -s "$DEVICE" shell am start -n {{.APP_ID}}/com.wails.app.MainActivity
+      - './scripts/android-deploy.sh --apk "{{.BIN_DIR}}/{{.APP_NAME}}.apk" --target device{{if .DEVICE_ID}} --serial "{{.DEVICE_ID}}"{{end}}{{if .APP_ID}} --expect "{{.APP_ID}}"{{end}}'
     preconditions:
       - sh: '[ -x "{{.ADB}}" ] || command -v adb'
         msg: "adb not found. Install the Android SDK platform-tools (or set ANDROID_HOME)"
@@ -430,25 +418,7 @@ tasks:
         vars:
           ARCH: arm64
     cmds:
-      - |
-        DEVICE='{{.DEVICE_ID | default ""}}'
-        if [ -z "$DEVICE" ]; then
-          DEVICE="${DEVICE_ID:-}"
-        fi
-        if [ -z "$DEVICE" ]; then
-          DEVICE=$("{{.ADB}}" devices | awk 'NR > 1 && $2 == "device" && $1 !~ /^emulator-/ { print $1; exit }')
-        fi
-        if [ -z "$DEVICE" ]; then
-          echo "Error: no connected physical Android device found."
-          echo "Pass DEVICE_ID=<serial> to target a device explicitly."
-          echo "Find connected device serials with: {{.ADB}} devices"
-          exit 1
-        fi
-
-        echo "Deploying {{.BIN_DIR}}/{{.APP_NAME}}.apk to device $DEVICE..."
-        "{{.ADB}}" -s "$DEVICE" uninstall {{.APP_ID}} 2>/dev/null || true
-        "{{.ADB}}" -s "$DEVICE" install "{{.BIN_DIR}}/{{.APP_NAME}}.apk"
-        "{{.ADB}}" -s "$DEVICE" shell am start -n {{.APP_ID}}/com.wails.app.MainActivity
+      - './scripts/android-deploy.sh --apk "{{.BIN_DIR}}/{{.APP_NAME}}.apk" --target device{{if .DEVICE_ID}} --serial "{{.DEVICE_ID}}"{{end}}{{if .APP_ID}} --expect "{{.APP_ID}}"{{end}}'
     preconditions:
       - sh: '[ -x "{{.ADB}}" ] || command -v adb'
         msg: "adb not found. Install the Android SDK platform-tools (or set ANDROID_HOME)"